Studio Tascam: Recording with Audacity

Welcome to PLU’s Knowledge Base, a resource for online help documents. To get started, enter a keyword into the search bar and press the Enter key. Documents related to your search will appear in a results list. Please contact itech@plu.edu for assistance.

Studio Tascam: Recording with Audacity

This document has instructions for using the Tascam USB audio interface to record an audio project with multiple mics in Audacity. The Tascam and Audacity are available for use in the Studio.

Step 1: Getting Started

Tascam USB Audio Interface

Positioning

Step 2: Set Mic Levels

Set the mic volume levels for each presenter individually. To set the volume level of a mic:
  1. Find the volume knob for the mic on the Tascam audio interface, which will match the number on the mic.
  2. Speak into the microphone at normal speaking volume. Continue to speak through the next 2 steps.
  3. Turn the knob to the right until the red light flashes.
  4. Turn the knob to the left in small increments until the red light stops. The volume should be as loud as possible without triggering the red light, which indicates that its too high.
  5. Repeat steps 1-4 for each presenter.

Step 3: Record

Its recommended to do a test recording at the beginning of each recording session. Listen to the recording and correct any audio issues, such as mic volume levels or unwanted noise.

To record a project in Audacity using the Tascam multi-mic setup:

  1. Ensure the mics are plugged into the Tascam USB Audio Interface, and navigate to Go > Applications from the top menu bar. Double-click Audacity to launch the program.
  2. Click the mic input drop-down and select the Tascam, which may be named US-4x4. If it isnt an option, quit Audacity by navigating to Audacity > Quit Audacity and launch the program again. If problems continue, restart the computer.
  3. Click the channels drop-down. Select the number of microphones being used.
  4. Click the Record button. New track(s) will begin recording and appear in the Timeline.
  5. Re-adjust the mic volume knobs on the Tascam as needed to finalize the levels. The ideal level is between -12 and -6 db. Each presenter should speak into their mic individually.

  6. When done recording, click the Stop button.
  7. Listen to the recording to check for errors. If needed, adjust the volume of the track(s) with the slider in the Track Controls.
  8. Navigate to File > Save Project > Save Project As.
  9. Rename the file, select a storage location, and click Save. This will save a backup of the original recording in case it needs to be retrieved.
  10. Navigate to File > Export > Export as MP3 (or WAV).
  11. Rename the file, select a storage location, and click Save. The recording will be saved as an audio file.

If working from the Studio computer, save project and audio files to a flash drive or Google Drive. When ready to edit, start a new Audacity project and import the audio file.